ACS Double Hemmer
Finish Two Edges At Once
The ACS Double Hemmer was designed to finish the outside edge of any project. This machine is custom made to any desired width. You have the ability to use the welding heads simultaneously or independently.
Spotlight Video
Features
- Controlled with an American made PLC / HMI combo
- User friendly touch screen for adjusting machine parameters
- Store up to 25 recipes for quick recall
- Ability to move both welding heads
- Finish panels of any size
- Four independently driven motors for smooth straight seams
- A quick and simple guide change can allow you to produce various seam configurations
Capable of Welding
Hem
Hem with Pocket
Hem with Rope
Keder
+ More
Requirements & Capabilities
- Power Requirements: 208-230 Volts - Single Phase or Three Phase
- Air Requirements: 80 psi, 4 CFM air pressure required
- Electric Codes: NFPA 70, 79 NEC Guidelines
- Max Temp Hot Air: 1382° F (750° C)
- Max Temp Hot Wedge: 932° F (500° C)
- Seam Width: 1/2" to 2" (12.7mm to 50.8mm)
- Welding Cycle: Up to 90ft/min (33.5 m/min)
Size & Specs
- Throat Width: 36" standard (92cm)
- Width: 48" (123cm)
- Length: Custom
- Height: 75" (190m)
Weldable Materials
- Vinyl (PVC) laminated fabrics
- Vinyl-coated fabrics
- Vinyl films
- Polyurethane films
- Polyethylene (PE)
- Non-woven polyester
- Polypropylene-coated fabrics
- Woven polypropylene
- Non-woven polypropylene
- Thermoplastic rubber fabrics
- Acrylics for awning and marine covers
- Fusing tape
- Weldable webbings
- Any thermoplastic material / fabric
If your material and/or fabric is not listed, please contact ACS Inc. for a product test.
Request a Quote from Our Sales Team
Call Now: +1-330-639-4878